Standard Hardwire Installation Cable
A Standard Hardwire Installation Cable is included with the TB2, this is suitable for use with the Driver ID Module, which can be added to your order.
Standard CAN bus (ODBII) Installation Cable
For ease of install, a Standard CAN bus (OBDII) installation cable is available for an additional $14 + GST. Note this is NOT suitable for use with the Driver ID Module.
CAN bus (ODBII) + IO Installation Cable
If you would like to use both CAN bus and the Driver ID Module, a CAN Bus (OBDII) + IO Installation Cable is available for an additional $30 + GST.
An IO Cable connects additional telemetry data like sensors, buttons and extra equipment or even control vehicle mechanisms remotely.
The TRACKbox™ TB2 4G CAT M1 is Sensium's flagship Vehicle Tracking device.
The TB2 gathers data from your moving vehicle to provide information concerning its location, speed and distance travelled. This makes it an invaluable tool for fleet management and vehicle security. In addition, it can be easily installed and augmented with optional accessories.
Two bundled cables are supplied with the TRACKbox TB2. A Standard Hardwire Cable is also included plus an additional OBDII Pass-Through cable which allows two products to be easily simultaneously plugged into the OBDII port of your vehicle interacting with your vehicle's CAN bus (the standard in-vehicle network). The OBDII pass-through gives you the ability to connect two products, such as a trackBOX TB2, plus another product such as a diagnostic scan tool.
Simply connect to the vehicle OBDII port for a complete installation.
Coupled with the ArmadaGPS monitoring services (see below).
Note the TB2 is only functional when paired with the ArmadaGPS monitoring service. Upon purchasing this product you will be personally contacted regarding your ArmadaGPS account.
ArmadaGPS Professional Plan - NZ$30 + GST per device/per month
One-month minimum term.
ArmadaGPS Essentials Plan - NZ$12 + GST per device/per month
One-month minimum term.
Network - 4G CAT M1
Size - 92 x 55 x 25mm
Weight - 78g
Waterproof - No
Backup Battery - 3.7V 1250mAh
Operating Voltage - 6 ~ 42V DC
Ignition State Sense - Yes
The Regulatory Compliance Mark (RCM) indicates that the products are compliant with the Australia and New Zealand radio-communications and Electro Magnetic Compatibility (ENC) standards. These are the standards needed to ensure the safety of products and that they are fit for their intended use, protect the radio spectrum, minimise interference and allow effective use of radiocommunications services.